Factory rooftops · Canary Islands · Spain
Factory rooftop solar in Telde: 178,200 kWh a year on 100 kWp
A 100 kWp array on a factory roof in Telde generates about 178,200 kWh a year at the local specific yield of 1,782 kWh/kWp. Factories are a better solar match than most commercial buildings because process loads, compressed air and HVAC run through the same daylight hours the array is producing.
With roughly 70% self-consumed against €0.22/kWh, that output is worth about €27,443 a year and pays back in around 3.3 years on an installed cost near €90,000. Strong local irradiance plus daytime process load is why factory rooftops in Telde are usually faster to close than speculative warehouse pitches.
Industrial estates around Telde sit in the same Canary Islands band as Las Palmas de Gran Canaria, Santa Cruz de Tenerife and San Cristóbal de La Laguna. What changes site to site is roof area, shading from plant rooms, and whether the factory runs a true day shift. SolarScout flags those roofs from satellite and OpenStreetMap rather than from a bought list.
Turn these rooftops into a lead list in minutes.
Scan this area free →Why factory roofs in Telde self-consume more than warehouses
A quiet distribution shed may export a large share of midday generation. A factory in Telde typically does not: motors, ovens, plating lines or refrigeration pull power while the sun is up, so a higher share of the 178,200 kWh stays behind the meter and the 3.3-year payback holds.
That is the conversation to open with — not "solar is green", but "this roof in Telde offsets about €27,443 a year at today's tariff of €0.22/kWh".
What to inspect on a Telde factory roof
Look for large, low-pitch structural roofs with few roof lights, limited HVAC clutter, and a south or east-west run that matches Canary Islands's 1,782 kWh/kWp resource. North-light sheds and heavily plant-loaded roofs still work, but usable kWp drops and payback stretches past the 3.3-year city example.
SolarScout estimates footprint first, then (where Google Solar data exists) modelled annual kWh, so you can skip the roofs that will never carry a 100 kWp array and spend time on the ones that will.
How to turn Telde factory roofs into a lead list
Scan Telde in SolarScout and filter for factories. Each row carries an estimated roof area, a worked saving at €0.22/kWh, and contact fields where map data provides them. Export CSV or Excel and drop the list into your CRM.
When Telde is thin, run the same scan on Las Palmas de Gran Canaria, Santa Cruz de Tenerife and San Cristóbal de La Laguna — they share the Canary Islands yield, so the economics stay comparable and you are not mixing a sunny coast with a cloudy hinterland.
Frequently asked questions
How much can a factory rooftop in Telde generate?
About 178,200 kWh a year on a 100 kWp array. That is 100 kWp multiplied by Telde's specific yield of 1,782 kWh/kWp; larger roofs scale linearly until structure, shading or grid export caps the design.
What payback does factory rooftop solar see in Telde?
Around 3.3 years when most of the generation is used on site. Factories usually beat empty warehouses on that score because daytime process load matches the solar curve.
How does SolarScout find factory rooftops in Telde?
It combines OpenStreetMap industrial building tags with satellite imagery and, where available, Google Solar modelling — then exports Telde factories as leads with roof area and a €27,443/year worked example on 100 kWp.